How to DNSSEC

1. run dig [domain] DNSSKEY
2. paste the contents of that into https://filippo.io/dnskey-to-ds/
3. go to your registrar
4. find DNS settings
5. apply settings in a manner similar to this:

Having issues setting up ONLYOFFICE when using traefik, due to CORS issues?

https://github.com/ONLYOFFICE/DocumentServer/issues/920

Ever end up completely bored and wish to somehow funnel virtualmin through traefik so you don’t end up wasting IPs?

have a look at this!

https://gist.github.com/Westie/aa81e4d526767d31df8eebe706f92122

you can either have this as a URL provider for traefik or you can curl it manually into your dynamic configuration folder

Turns out, sometimes MBRs can be totally fucked.

`testdisk` doesn’t care about LVMs (but can detect it) and gparted also doesn’t care (in a fashion degree)

If you end up with “Cannot boot: invalid boot drive” or something, restore your MBR with testdisk then reinstall grub via a live CD.

And now to bed.

within /etc/network/interfaces

auto vmbr2
iface vmbr2 inet static
        address 192.168.100.254
        netmask 255.255.255.0
        bridge_ports none
        bridge_stp off
        bridge_fd 0

        post-up   echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up   iptables -t nat -A POSTROUTING -s '192.168.100.0/24' -o vmbr0 -j MASQUERADE
        post-down iptables -t nat -D POSTROUTING -s '192.168.100.0/24' -o vmbr0 -j MASQUERADE

followed by

$ service networking restart

within network on Proxmox host

within network on gateway VM

MAC can be left to auto

Somewhat working.

Good luck.

https://github.com/Westie/volumio-plugins-ampache